The device is designed to protect the worker during the moving and handling of shipping and construction containers.

The device complies with EN 795B:2012, which means that it is a temporary anchor point installed in a way that prevents accidental disconnection of the point from the structural element to which it is mounted. However, it is possible to disconnect them intentionally from the structure; in this case, at least two separate and consecutive actions without the use of additional tools shall be performed.

Corner anchor points are available in two versions: NPK_L and NPK_T. The anchor points are designed to be installed in the transport slots located at the corners of the container.

The corner anchor points are designed to be installed only in the side slots of container corners that comply with ISO 1161.

The article NPK – Corner Anchor Points comes from the website ALTOSEKURA.

Formwork hook is a mobile anchor point conforming to EN795:2012B standard. It was designed to provide fall protection when working on formworks.

Formwork hook connects with formwork wales by pin which is meant to be inserted into slots in horizontal formwork wales. Pin attachements were designed to fit to different formwork walls from different manufacturers.

Due to the low weight of the hooks they are convenient to work with. Tests performed during hook development (incl. tests with load cells) ensure safety of formwork structures when using hooks.

Interchangable attachements for pin can be easily changed for other type to fit different type of formwork. Changing attachements require only two allen keys therefore it can be done on site when needed.

Formwork hooks can be used for moving and work positioning on formwork walls. For work positioning (shown in a picture) lower hook is intended for positioning and upper for fall protection.

The article HAS – Formwork Hook comes from the website ALTOSEKURA.